Example Guide On Setting Up Native Partitioning
========================================

- [Simple Time Based: 1 Partition Per Day](#simple-time-based-1-partition-per-day)
- [Simple Time Based with UUIDv7 type: 1 Partition Per Day](#simple-time-based-with-uuidv7-type-1-partition-per-day)
- [Simple Time Based with Text Type: 1 Partition Per Day](#simple-time-based-with-text-type-1-partition-per-day)
- [Simple Serial ID: 1 Partition Per 10 ID Values](#simple-serial-id-1-partition-Per-10-id-values)
- [Partitioning an Existing Table](#partitioning-an-existing-table)
  * [Offline Partitioning](#offline-partitioning)
  * [Online Partitioning](#online-partitioning)
- [Undoing Native Partitioning](#undoing-native-partitioning)

This HowTo guide will show you some examples of how to set up simple, single level partitioning. It will also show you several methods to partition data out of a table that has existing data (see [Partitioning an Existing Table](#partitioning-an-existing-table)) and undo the partitioning of an existing partition set (see [Undoing Native Partitioning](#undoing-native-partitioning)). For more details on what each function does and the additional features in this extension, please see the **pg_partman.md** documentation file.

The examples in this document assume you are running at least 5.0.1 of pg_partman with PostgreSQL 14 or higher.

### Simple Time Based: 1 Partition Per Day
For native partitioning, you must start with a parent table that has already been set up to be partitioned in the desired type. Currently pg_partman only supports the RANGE type of partitioning (both for time & id). You cannot turn a non-partitioned table into the parent table of a partitioned set, which can make migration a challenge. This document will show you some techniques for how to manage this later. For now, we will start with a brand new table in this example. Any non-unique indexes can also be added to the parent table in PG11+ and they will automatically be created on all child tables.

```sql
CREATE SCHEMA IF NOT EXISTS partman_test;

CREATE TABLE partman_test.time_taptest_table
    (col1 int,
    col2 text default 'stuff',
    col3 timestamptz NOT NULL DEFAULT now())
PARTITION BY RANGE (col3);

CREATE INDEX ON partman_test.time_taptest_table (col3);
```
```sql
\d+ partman_test.time_taptest_table
                                      Partitioned table "partman_test.time_taptest_table"
 Column |           Type           | Collation | Nullable |    Default    | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+---------------+----------+-------------+--------------+-------------
 col1   | integer                  |           |          |               | plain    |             |              |
 col2   | text                     |           |          | 'stuff'::text | extended |             |              |
 col3   | timestamp with time zone |           | not null | now()         | plain    |             |              |
Partition key: RANGE (col3)
Indexes:
    "time_taptest_table_col3_idx" btree (col3)
Number of partitions: 0

```
Unique indexes (including primary keys) cannot be created on a natively partitioned parent unless they include the partition key. For time-based partitioning that generally doesn't work out since that would limit only a single timestamp value in each child table. pg_partman helps to manage this by using a template table to manage properties that currently are not supported by native partitioning. Note that this does *not* solve the issue of the constraint *not* being enforced across the entire partition set. See the [main documentation](pg_partman.md#child-table-property-inheritance) to see which properties are managed by the template.

For this example, we are going to manually create the template table first so that when we run `create_parent()` the initial child tables that are created will have a primary key. If you do not supply a template table to pg_partman, it will create one for you in the schema that you installed the extension to. However properties you add to that template are only then applied to newly created child tables after that point. You will have to retroactively apply those properties manually to any child tables that already existed.
```sql
CREATE TABLE partman_test.time_taptest_table_template (LIKE partman_test.time_taptest_table);

ALTER TABLE partman_test.time_taptest_table_template ADD PRIMARY KEY (col1);
```
```sql
 \d partman_test.time_taptest_table_template
          Table "partman_test.time_taptest_table_template"
 Column |           Type           | Collation | Nullable | Default
--------+--------------------------+-----------+----------+---------
 col1   | integer                  |           | not null |
 col2   | text                     |           |          |
 col3   | timestamp with time zone |           | not null |
Indexes:
    "time_taptest_table_template_pkey" PRIMARY KEY, btree (col1)
```
```sql
SELECT partman.create_parent(
    p_parent_table := 'partman_test.time_taptest_table'
    , p_control := 'col3'
    , p_interval := '1 day'
    , p_template_table := 'partman_test.time_taptest_table_template'
);
 create_parent
---------------
 t
(1 row)
```
```sql
\d+ partman_test.time_taptest_table
                                      Partitioned table "partman_test.time_taptest_table"
 Column |           Type           | Collation | Nullable |    Default    | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+---------------+----------+-------------+--------------+-------------
 col1   | integer                  |           |          |               | plain    |             |              |
 col2   | text                     |           |          | 'stuff'::text | extended |             |              |
 col3   | timestamp with time zone |           | not null | now()         | plain    |             |              |
Partition key: RANGE (col3)
Indexes:
    "time_taptest_table_col3_idx" btree (col3)
Partitions: partman_test.time_taptest_table_p20230324 FOR VALUES FROM ('2023-03-24 00:00:00-07') TO ('2023-03-25 00:00:00-07'),
            partman_test.time_taptest_table_p20230325 FOR VALUES FROM ('2023-03-25 00:00:00-07') TO ('2023-03-26 00:00:00-07'),
            partman_test.time_taptest_table_p20230326 FOR VALUES FROM ('2023-03-26 00:00:00-07') TO ('2023-03-27 00:00:00-07'),
            partman_test.time_taptest_table_p20230327 FOR VALUES FROM ('2023-03-27 00:00:00-07') TO ('2023-03-28 00:00:00-07'),
            partman_test.time_taptest_table_p20230328 FOR VALUES FROM ('2023-03-28 00:00:00-07') TO ('2023-03-29 00:00:00-07'),
            partman_test.time_taptest_table_p20230329 FOR VALUES FROM ('2023-03-29 00:00:00-07') TO ('2023-03-30 00:00:00-07'),
            partman_test.time_taptest_table_p20230330 FOR VALUES FROM ('2023-03-30 00:00:00-07') TO ('2023-03-31 00:00:00-07'),
            partman_test.time_taptest_table_p20230331 FOR VALUES FROM ('2023-03-31 00:00:00-07') TO ('2023-04-01 00:00:00-07'),
            partman_test.time_taptest_table_p20230401 FOR VALUES FROM ('2023-04-01 00:00:00-07') TO ('2023-04-02 00:00:00-07'),
            partman_test.time_taptest_table_default DEFAULT
```
```sql
\d+ partman_test.time_taptest_table_p20230324
                                       Table "partman_test.time_taptest_table_p20230324"
 Column |           Type           | Collation | Nullable |    Default    | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+---------------+----------+-------------+--------------+-------------
 col1   | integer                  |           | not null |               | plain    |             |              |
 col2   | text                     |           |          | 'stuff'::text | extended |             |              |
 col3   | timestamp with time zone |           | not null | now()         | plain    |             |              |
Partition of: partman_test.time_taptest_table FOR VALUES FROM ('2023-03-24 00:00:00-07') TO ('2023-03-25 00:00:00-07')
Partition constraint: ((col3 IS NOT NULL) AND (col3 >= '2023-03-24 00:00:00-07'::timestamp with time zone) AND (col3 < '2023-03-25 00:00:00-07'::timestamp with time zone))
Indexes:
    "time_taptest_table_p20230324_pkey" PRIMARY KEY, btree (col1)
    "time_taptest_table_p20230324_col3_idx" btree (col3)
Access method: heap
```

### Simple Time Based with UUIDv7 type: 1 Partition Per Day
This is similar to simple time based paritioning but using UUIDv7 identifiers.

```sql
CREATE SCHEMA IF NOT EXISTS partman_test;

CREATE TABLE partman_test.time_taptest_table
    (col1 int,
    col2 text default 'stuff',
    col3 uuid PRIMARY KEY)
PARTITION BY RANGE (col3);

```
```sql
\d+ partman_test.time_taptest_table
                              Partitioned table "partman_test.time_taptest_table"
 Column |  Type   | Collation | Nullable |    Default    | Storage  | Compression | Stats target | Description 
--------+---------+-----------+----------+---------------+----------+-------------+--------------+-------------
 col1   | integer |           |          |               | plain    |             |              | 
 col2   | text    |           |          | 'stuff'::text | extended |             |              | 
 col3   | uuid    |           | not null |               | plain    |             |              | 
Partition key: RANGE (col3)
Indexes:
    "time_taptest_table_pkey" PRIMARY KEY, btree (col3)
Number of partitions: 0

```
For this example we use col3 as the partition key and builtin uuidv7 encoder/decoder functions to enable time based paritioning on col3. Because col3 is the partition key, the primary key index is automatically inherited by child partitions.
```sql
SELECT partman.create_parent(
    p_parent_table := 'partman_test.time_taptest_table'
    , p_control := 'col3'
    , p_interval := '1 day'
    , p_time_encoder := 'partman.uuid7_time_encoder'
    , p_time_decoder := 'partman.uuid7_time_decoder'
);
 create_parent
---------------
 t
(1 row)
```
```sql
\d+ partman_test.time_taptest_table
--------+---------+-----------+----------+---------------+----------+-------------+--------------+-------------
 col1   | integer |           |          |               | plain    |             |              | 
 col2   | text    |           |          | 'stuff'::text | extended |             |              | 
 col3   | uuid    |           | not null |               | plain    |             |              | 
Partition key: RANGE (col3)
Indexes:
    "time_taptest_table_pkey" PRIMARY KEY, btree (col3)
Partitions: partman_test.time_taptest_table_p20240813 FOR VALUES FROM ('019147da-b040-0000-0000-000000000000') TO ('01914d01-0c40-0000-0000-000000000000'),
            partman_test.time_taptest_table_p20240814 FOR VALUES FROM ('01914d01-0c40-0000-0000-000000000000') TO ('01915227-6840-0000-0000-000000000000'),
            partman_test.time_taptest_table_p20240815 FOR VALUES FROM ('01915227-6840-0000-0000-000000000000') TO ('0191574d-c440-0000-0000-000000000000'),
            partman_test.time_taptest_table_p20240816 FOR VALUES FROM ('0191574d-c440-0000-0000-000000000000') TO ('01915c74-2040-0000-0000-000000000000'),
            partman_test.time_taptest_table_p20240817 FOR VALUES FROM ('01915c74-2040-0000-0000-000000000000') TO ('0191619a-7c40-0000-0000-000000000000'),
            partman_test.time_taptest_table_p20240818 FOR VALUES FROM ('0191619a-7c40-0000-0000-000000000000') TO ('019166c0-d840-0000-0000-000000000000'),
            partman_test.time_taptest_table_p20240819 FOR VALUES FROM ('019166c0-d840-0000-0000-000000000000') TO ('01916be7-3440-0000-0000-000000000000'),
            partman_test.time_taptest_table_p20240820 FOR VALUES FROM ('01916be7-3440-0000-0000-000000000000') TO ('0191710d-9040-0000-0000-000000000000'),
            partman_test.time_taptest_table_p20240821 FOR VALUES FROM ('0191710d-9040-0000-0000-000000000000') TO ('01917633-ec40-0000-0000-000000000000'),
            partman_test.time_taptest_table_default DEFAULT
```
```sql
\d+ partman_test.time_taptest_table_p20240813
 Column |  Type   | Collation | Nullable |    Default    | Storage  | Compression | Stats target | Description 
--------+---------+-----------+----------+---------------+----------+-------------+--------------+-------------
 col1   | integer |           |          |               | plain    |             |              | 
 col2   | text    |           |          | 'stuff'::text | extended |             |              | 
 col3   | uuid    |           | not null |               | plain    |             |              | 
Partition of: partman_test.time_taptest_table FOR VALUES FROM ('019147da-b040-0000-0000-000000000000') TO ('01914d01-0c40-0000-0000-000000000000')
Partition constraint: ((col3 IS NOT NULL) AND (col3 >= '019147da-b040-0000-0000-000000000000'::uuid) AND (col3 < '01914d01-0c40-0000-0000-000000000000'::uuid))
Indexes:
    "time_taptest_table_p20240813_pkey" PRIMARY KEY, btree (col3)
Access method: heap
```


### Simple Time Based with Text Type: 1 Partition Per Day
This is similar to simple time based paritioning but using text control column. 
For this example we will assume col3 contains identifiers formatted as `INVYYYYMMDD` where `INV` is a static application defined prefix and the remaining is a timestamp component.

```sql
CREATE SCHEMA IF NOT EXISTS partman_test;

CREATE TABLE partman_test.time_taptest_table
    (col1 int,
    col2 text default 'stuff',
    col3 text PRIMARY KEY)
PARTITION BY RANGE (col3);

```
```sql
\d+ partman_test.time_taptest_table
                              Partitioned table "partman_test.time_taptest_table"
 Column |  Type   | Collation | Nullable |    Default    | Storage  | Compression | Stats target | Description 
--------+---------+-----------+----------+---------------+----------+-------------+--------------+-------------
 col1   | integer |           |          |               | plain    |             |              | 
 col2   | text    |           |          | 'stuff'::text | extended |             |              | 
 col3   | text    |           | not null |               | extended |             |              | 
Partition key: RANGE (col3)
Indexes:
    "time_taptest_table_pkey" PRIMARY KEY, btree (col3)
Number of partitions: 0

```
In order to use col3 as control column for time partitioning, we need to define encoder/decoder functions that tell pg_partman how to derive time information from the identifier.

```sql
CREATE FUNCTION public.encode_timestamp(p_timestamp timestamptz, OUT encoded text)
    RETURNS text
    LANGUAGE plpgsql STABLE
    AS $$
BEGIN
    SELECT concat('INV', to_char(p_timestamp, 'YYYYMMDD')) INTO encoded;
END
$$;

CREATE FUNCTION public.decode_timestamp(p_str text, OUT ts timestamptz)
    RETURNS TIMESTAMPTZ
    LANGUAGE plpgsql STABLE
    AS $$
BEGIN
    SELECT substr(p_str, 4) INTO ts;
END
$$;
```
 
```sql
SELECT partman.create_parent(
    p_parent_table := 'partman_test.time_taptest_table'
    , p_control := 'col3'
    , p_interval := '1 day'
    , p_time_encoder := 'public.encode_timestamp'
    , p_time_decoder := 'public.decode_timestamp'
);
 create_parent
---------------
 t
(1 row)
```
```sql
                              Partitioned table "partman_test.time_taptest_table"
 Column |  Type   | Collation | Nullable |    Default    | Storage  | Compression | Stats target | Description 
--------+---------+-----------+----------+---------------+----------+-------------+--------------+-------------
 col1   | integer |           |          |               | plain    |             |              | 
 col2   | text    |           |          | 'stuff'::text | extended |             |              | 
 col3   | text    |           | not null |               | extended |             |              | 
Partition key: RANGE (col3)
Indexes:
    "time_taptest_table_pkey" PRIMARY KEY, btree (col3)
Partitions: time_taptest_table_p20240815 FOR VALUES FROM ('INV20240815') TO ('INV20240816'),
            time_taptest_table_p20240816 FOR VALUES FROM ('INV20240816') TO ('INV20240817'),
            time_taptest_table_p20240817 FOR VALUES FROM ('INV20240817') TO ('INV20240818'),
            time_taptest_table_p20240818 FOR VALUES FROM ('INV20240818') TO ('INV20240819'),
            time_taptest_table_p20240819 FOR VALUES FROM ('INV20240819') TO ('INV20240820'),
            time_taptest_table_p20240820 FOR VALUES FROM ('INV20240820') TO ('INV20240821'),
            time_taptest_table_p20240821 FOR VALUES FROM ('INV20240821') TO ('INV20240822'),
            time_taptest_table_p20240822 FOR VALUES FROM ('INV20240822') TO ('INV20240823'),
            time_taptest_table_p20240823 FOR VALUES FROM ('INV20240823') TO ('INV20240824'),
            time_taptest_table_default DEFAULT
```
```sql
\d+ partman_test.time_taptest_table_p20240815
                               Table "partman_test.time_taptest_table_p20240815"
 Column |  Type   | Collation | Nullable |    Default    | Storage  | Compression | Stats target | Description 
--------+---------+-----------+----------+---------------+----------+-------------+--------------+-------------
 col1   | integer |           |          |               | plain    |             |              | 
 col2   | text    |           |          | 'stuff'::text | extended |             |              | 
 col3   | text    |           | not null |               | extended |             |              | 
Partition of: time_taptest_table FOR VALUES FROM ('INV20240815') TO ('INV20240816')
Partition constraint: ((col3 IS NOT NULL) AND (col3 >= 'INV20240815'::text) AND (col3 < 'INV20240816'::text))
Indexes:
    "time_taptest_table_p20240815_pkey" PRIMARY KEY, btree (col3)
Access method: heap
```
### Simple Serial ID: 1 Partition Per 10 ID Values
For this use-case, the template table is not created manually before calling `create_parent()`. So it shows that if a primary/unique key is added later, it does not apply to the currently existing child tables. That will have to be done manually.

```sql
CREATE TABLE partman_test.id_taptest_table (
    col1 bigint not null
    , col2 text
    , col3 timestamptz DEFAULT now() not null
    , col4 text)
PARTITION BY RANGE (col1);

CREATE INDEX ON partman_test.id_taptest_table (col1);
```
```sql
\d+ partman_test.id_taptest_table
                                    Partitioned table "partman_test.id_taptest_table"
 Column |           Type           | Collation | Nullable | Default | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+---------+----------+-------------+--------------+-------------
 col1   | bigint                   |           | not null |         | plain    |             |              |
 col2   | text                     |           |          |         | extended |             |              |
 col3   | timestamp with time zone |           | not null | now()   | plain    |             |              |
 col4   | text                     |           |          |         | extended |             |              |
Partition key: RANGE (col1)
Indexes:
    "id_taptest_table_col1_idx" btree (col1)
Number of partitions: 0
```
```sql
SELECT partman.create_parent(
    p_parent_table := 'partman_test.id_taptest_table'
    , p_control := 'col1'
    , p_interval := '10'
);
 create_parent
---------------
 t
(1 row)
```
```sql
\d+ partman_test.id_taptest_table
                                    Partitioned table "partman_test.id_taptest_table"
 Column |           Type           | Collation | Nullable | Default | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+---------+----------+-------------+--------------+-------------
 col1   | bigint                   |           | not null |         | plain    |             |              |
 col2   | text                     |           |          |         | extended |             |              |
 col3   | timestamp with time zone |           | not null | now()   | plain    |             |              |
 col4   | text                     |           |          |         | extended |             |              |
Partition key: RANGE (col1)
Indexes:
    "id_taptest_table_col1_idx" btree (col1)
Partitions: partman_test.id_taptest_table_p0 FOR VALUES FROM ('0') TO ('10'),
            partman_test.id_taptest_table_p10 FOR VALUES FROM ('10') TO ('20'),
            partman_test.id_taptest_table_p20 FOR VALUES FROM ('20') TO ('30'),
            partman_test.id_taptest_table_p30 FOR VALUES FROM ('30') TO ('40'),
            partman_test.id_taptest_table_p40 FOR VALUES FROM ('40') TO ('50'),
            partman_test.id_taptest_table_default DEFAULT
```

You can see the name of the template table by looking in the pg_partman configuration for that parent table

```sql
SELECT template_table
FROM partman.part_config
WHERE parent_table = 'partman_test.id_taptest_table';

                 template_table  
------------------------------------------------
 partman.template_partman_test_id_taptest_table
(1 row)
```
```sql
ALTER TABLE partman.template_partman_test_id_taptest_table ADD PRIMARY KEY (col2);
```
Now if we add some data and run maintenance again to create new child tables...
```sql
INSERT INTO partman_test.id_taptest_table (col1, col2) VALUES (generate_series(1,20), generate_series(1,20)::text||'stuff'::text);

CALL partman.run_maintenance_proc();

\d+ partman_test.id_taptest_table
                                    Partitioned table "partman_test.id_taptest_table"
 Column |           Type           | Collation | Nullable | Default | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+---------+----------+-------------+--------------+-------------
 col1   | bigint                   |           | not null |         | plain    |             |              |
 col2   | text                     |           |          |         | extended |             |              |
 col3   | timestamp with time zone |           | not null | now()   | plain    |             |              |
 col4   | text                     |           |          |         | extended |             |              |
Partition key: RANGE (col1)
Indexes:
    "id_taptest_table_col1_idx" btree (col1)
Partitions: partman_test.id_taptest_table_p0 FOR VALUES FROM ('0') TO ('10'),
            partman_test.id_taptest_table_p10 FOR VALUES FROM ('10') TO ('20'),
            partman_test.id_taptest_table_p20 FOR VALUES FROM ('20') TO ('30'),
            partman_test.id_taptest_table_p30 FOR VALUES FROM ('30') TO ('40'),
            partman_test.id_taptest_table_p40 FOR VALUES FROM ('40') TO ('50'),
            partman_test.id_taptest_table_p50 FOR VALUES FROM ('50') TO ('60'),
            partman_test.id_taptest_table_p60 FOR VALUES FROM ('60') TO ('70'),
            partman_test.id_taptest_table_default DEFAULT

```
... you'll see that only the new child tables (p50 & p60) have that primary key and the original tables do not (p40 and earlier).
```sql
keith=# \d partman_test.id_taptest_table_p40
             Table "partman_test.id_taptest_table_p40"
 Column |           Type           | Collation | Nullable | Default
--------+--------------------------+-----------+----------+---------
 col1   | bigint                   |           | not null |
 col2   | text                     |           |          |
 col3   | timestamp with time zone |           | not null | now()
 col4   | text                     |           |          |
Partition of: partman_test.id_taptest_table FOR VALUES FROM ('40') TO ('50')
Indexes:
    "id_taptest_table_p40_col1_idx" btree (col1)

keith=# \d partman_test.id_taptest_table_p50
             Table "partman_test.id_taptest_table_p50"
 Column |           Type           | Collation | Nullable | Default
--------+--------------------------+-----------+----------+---------
 col1   | bigint                   |           | not null |
 col2   | text                     |           | not null |
 col3   | timestamp with time zone |           | not null | now()
 col4   | text                     |           |          |
Partition of: partman_test.id_taptest_table FOR VALUES FROM ('50') TO ('60')
Indexes:
    "id_taptest_table_p50_pkey" PRIMARY KEY, btree (col2)
    "id_taptest_table_p50_col1_idx" btree (col1)

keith=# \d partman_test.id_taptest_table_p60
             Table "partman_test.id_taptest_table_p60"
 Column |           Type           | Collation | Nullable | Default
--------+--------------------------+-----------+----------+---------
 col1   | bigint                   |           | not null |
 col2   | text                     |           | not null |
 col3   | timestamp with time zone |           | not null | now()
 col4   | text                     |           |          |
Partition of: partman_test.id_taptest_table FOR VALUES FROM ('60') TO ('70')
Indexes:
    "id_taptest_table_p60_pkey" PRIMARY KEY, btree (col2)
    "id_taptest_table_p60_col1_idx" btree (col1)
```
Add them manually:
```sql
ALTER TABLE partman_test.id_taptest_table_p0 ADD PRIMARY KEY (col2);
ALTER TABLE partman_test.id_taptest_table_p10 ADD PRIMARY KEY (col2);
ALTER TABLE partman_test.id_taptest_table_p20 ADD PRIMARY KEY (col2);
ALTER TABLE partman_test.id_taptest_table_p30 ADD PRIMARY KEY (col2);
ALTER TABLE partman_test.id_taptest_table_p40 ADD PRIMARY KEY (col2);
```

### Partitioning an Existing Table

Partitioning an existing table with native partitioning is not as straight forward as just altering a table. As stated above, you cannot turn an already existing table into the parent table of a native partition set. The parent of a native partitioned table must be declared partitioned at the time of its creation. However, there are still methods to take an existing table and partition it natively. Two of those are presented below.

One tip that may possibly help with the speed/load of partitioning a table would be to run a CLUSTER on the original source table using the partition key's index shortly before the partitioning is done. Since the data will be read sequentially from the source table, having it be in order could potentially help with IO efficiency on very large tables. Just note that this does take an access exclusive lock on the table, but you can do this one child table at a time. See the PostgreSQL documentation - https://www.postgresql.org/docs/current/sql-cluster.html

#### Offline Partitioning

This method is being labelled "offline" because, during points in this process, the data is not accessible to both the new and old table from a single object. The data is moved from the original table to a brand new table. The advantage of this method is that you can move your data in much smaller batches than even the target partition size, which can be a huge efficiency advantage for very large partition sets (you can commit in batches of several thousand vs several million). There are also less object renaming steps as we'll see in the online partitioning method next.

*IMPORTANT NOTE REGARDING FOREIGN KEYS*

Taking the partitioned table offline is the only method that realistically works when you have foreign keys TO the table being partitioned. Since a brand new table must be created no matter what, the foreign key must also be recreated, so an outage involving all tables that are part of the FK relationship must be taken. A shorter outage may be possible with the online method below, but if you have to take an outage, this offline method is easier.

Here is the original table with some generated data:

```sql
CREATE TABLE public.original_table (
    col1 bigint not null
    , col2 text not null
    , col3 timestamptz DEFAULT now()
    , col4 text);

CREATE INDEX ON public.original_table (col1);

INSERT INTO public.original_table (col1, col2, col3, col4) VALUES (generate_series(1,100000), 'stuff'||generate_series(1,100000), now(), 'stuff');
```

First, the original table should be renamed so the partitioned table can be made with the original table's name. This makes it so that, when the child tables are created, they have names that are associated with the original table name.
```sql
ALTER TABLE public.original_table RENAME to old_nonpartitioned_table;
```
We'll use the serial partitioning example from above. The initial setup is exactly the same, creating a brand new table that will be the parent and then running `create_parent()` on it. We'll make the interval slightly larger this time. Also, make sure you've applied all the same original properties to this new table that the old table had: privileges, constraints, defaults, indexes, etc. Privileges are especially important to make sure they match so that all users of the table will continue to work after the conversion.

Note that primary keys/unique indexes cannot be applied to a partitioned parent unless the partition key is part of it. In this case that would work, however it's likely not the intention since that would mean only one row per value is allowed and that would mean only 10,000 rows could ever exist in each child table. Partitioning is definitely not needed in that case then. The next example of online partitioning will show how to handle when you need a primary key for a column that is not part of the partition key.

```sql
CREATE TABLE public.original_table (
    col1 bigint not null
    , col2 text not null
    , col3 timestamptz DEFAULT now()
    , col4 text)
PARTITION BY RANGE (col1);

CREATE INDEX ON public.original_table (col1);

SELECT partman.create_parent(
    p_parent_table := 'public.original_table'
    , p_control := 'col1'
    , p_interval := '10000'
);
```
```sql
\d+ original_table;
                                        Partitioned table "public.original_table"
 Column |           Type           | Collation | Nullable | Default | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+---------+----------+-------------+--------------+-------------
 col1   | bigint                   |           | not null |         | plain    |             |              |
 col2   | text                     |           | not null |         | extended |             |              |
 col3   | timestamp with time zone |           |          | now()   | plain    |             |              |
 col4   | text                     |           |          |         | extended |             |              |
Partition key: RANGE (col1)
Indexes:
    "original_table_col1_idx1" btree (col1)
    "original_table_col1_idx2" btree (col1)
Partitions: original_table_p0 FOR VALUES FROM ('0') TO ('10000'),
            original_table_p10000 FOR VALUES FROM ('10000') TO ('20000'),
            original_table_p20000 FOR VALUES FROM ('20000') TO ('30000'),
            original_table_p30000 FOR VALUES FROM ('30000') TO ('40000'),
            original_table_p40000 FOR VALUES FROM ('40000') TO ('50000'),
            original_table_default DEFAULT
```
If you happened to be using IDENTITY columns, or you created a new sequence for the new partitioned table, you'll want to get the value of those old sequences and reset the new sequences to start with those old values. Some tips for doing that are covered in the Online Partitioning section below. If you just re-used the same sequence on the new partitioned table, you should be fine.

Now we can use the `partition_data_proc()` procedure to migrate our data from the old table to the new table. And we're going to do it in 1,000 row increments vs the 10,000 interval that the partition set has. The batch value is used to tell it how many times to run through the given interval; the default value of 1 only makes a single child table. Since we want to partition all of the data, just give it a number equal to or greater than the expected child table count. This procedure has an option where you can tell it the source of the data, which is how we're going to migrate the data from the old table. Without setting this option, it attempts to clean the data out of the DEFAULT partition (which we'll see an example of next).

```sql
keith=# CALL partman.partition_data_proc(
    p_parent_table := 'public.original_table'
    , p_loop_count := 200
    , p_interval := '1000'
    , p_source_table := 'public.old_nonpartitioned_table'
);
NOTICE:  Loop: 1, Rows moved: 1000
NOTICE:  Loop: 2, Rows moved: 1000
NOTICE:  Loop: 3, Rows moved: 1000
NOTICE:  Loop: 4, Rows moved: 1000
NOTICE:  Loop: 5, Rows moved: 1000
NOTICE:  Loop: 6, Rows moved: 1000
NOTICE:  Loop: 7, Rows moved: 1000
NOTICE:  Loop: 8, Rows moved: 1000
NOTICE:  Loop: 9, Rows moved: 1000
NOTICE:  Loop: 10, Rows moved: 999
NOTICE:  Loop: 11, Rows moved: 1000
NOTICE:  Loop: 12, Rows moved: 1000
[...]
NOTICE:  Loop: 99, Rows moved: 1000
NOTICE:  Loop: 100, Rows moved: 1000
NOTICE:  Loop: 101, Rows moved: 1
NOTICE:  Total rows moved: 100000
NOTICE:  Ensure to VACUUM ANALYZE the parent (and source table if used) after partitioning data


VACUUM ANALYZE public.original_table;
```

Again, doing the commits in smaller batches like this can avoid transactions with huge row counts and long runtimes when you're partitioning a table that may have billions of rows. It's always advisable to avoid long running transactions to allow PostgreSQL's autovacuum process to work efficiently for the rest of the database. However, doing smaller batches per loop can cause the process to partition the data to take longer. You will have to find the balance between the load on your database and time required.

Using the `partition_data_proc()` PROCEDURE vs the `partition_data_id()` FUNCTION allows those commit batches. Functions in PostgreSQL always run entirely in a single transaction, even if you may tell it to do things in batches inside the function.

Now if we check our original table, it is empty
```sql
SELECT count(*) FROM old_nonpartitioned_table;
 count
-------
     0
(1 row)
```
And the new, partitioned table with the original name has all the data and child tables created
```sql
SELECT count(*) FROM original_table;
 count  
--------
 100000
(1 row)


 \d+ public.original_table
                                        Partitioned table "public.original_table"
 Column |           Type           | Collation | Nullable | Default | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+---------+----------+-------------+--------------+-------------
 col1   | bigint                   |           | not null |         | plain    |             |              |
 col2   | text                     |           | not null |         | extended |             |              |
 col3   | timestamp with time zone |           |          | now()   | plain    |             |              |
 col4   | text                     |           |          |         | extended |             |              |
Partition key: RANGE (col1)
Indexes:
    "original_table_col1_idx" btree (col1)
Partitions: original_table_p0 FOR VALUES FROM ('0') TO ('10000'),
            original_table_p10000 FOR VALUES FROM ('10000') TO ('20000'),
            original_table_p100000 FOR VALUES FROM ('100000') TO ('110000'),
            original_table_p20000 FOR VALUES FROM ('20000') TO ('30000'),
            original_table_p30000 FOR VALUES FROM ('30000') TO ('40000'),
            original_table_p40000 FOR VALUES FROM ('40000') TO ('50000'),
            original_table_p50000 FOR VALUES FROM ('50000') TO ('60000'),
            original_table_p60000 FOR VALUES FROM ('60000') TO ('70000'),
            original_table_p70000 FOR VALUES FROM ('70000') TO ('80000'),
            original_table_p80000 FOR VALUES FROM ('80000') TO ('90000'),
            original_table_p90000 FOR VALUES FROM ('90000') TO ('100000'),
            original_table_default DEFAULT

SELECT count(*) FROM original_table_p10000;
 count
-------
 10000
(1 row)

```

Now you should be able to start using your table the same as you were before!


#### Online Partitioning

Sometimes it is not possible to take the table offline for an extended period of time to migrate it to a partitioned table. Below is one method to allow this to be done online. It's not as flexible as the offline method, but should allow a very minimal downtime and be mostly transparent to the end users of the table.

As mentioned above, these methods DO NOT account for there being foreign keys TO the original table. You can create foreign keys FROM the original table on the new partitioned table and things should work as expected. However, if you have foreign keys coming in to the table, I'm not aware of any migration method that does not require an outage to drop the original foreign keys and recreate them against the new partitioned table.

This will be a daily, time-based partition set with an IDENTITY sequence as the primary key
```sql
CREATE TABLE public.original_table (
    col1 bigint not null PRIMARY KEY GENERATED ALWAYS AS IDENTITY
    , col2 text not null
    , col3 timestamptz DEFAULT now() not null
    , col4 text);

CREATE INDEX CONCURRENTLY ON public.original_table (col3);

INSERT INTO public.original_table (col2, col3, col4) VALUES ('stuff', generate_series(now() - '1 week'::interval, now(), '5 minutes'::interval), 'stuff');
```
The process is still initially the same as the offline method since you cannot turn an existing table into the parent table of a partition set. However it is critical that all constraints, privileges, defaults and any other properties be applied to the new parent table before you move on to the next step of swapping the table names around.
```sql
CREATE TABLE public.new_partitioned_table (
    col1 bigint not null GENERATED BY DEFAULT AS IDENTITY
    , col2 text not null
    , col3 timestamptz DEFAULT now() not null
    , col4 text) PARTITION BY RANGE (col3);

CREATE INDEX ON public.new_partitioned_table (col3);
```
You'll notice I did not set "col1" as a primary key here. That is because we cannot.
```sql
CREATE TABLE public.new_partitioned_table (
    col1 bigint not null PRIMARY KEY GENERATED BY DEFAULT AS IDENTITY
    , col2 text not null
    , col3 timestamptz DEFAULT now() not null
    , col4 text) PARTITION BY RANGE (col3);
ERROR:  unique constraint on partitioned table must include all partitioning columns
DETAIL:  PRIMARY KEY constraint on table "new_partitioned_table" lacks column "col3" which is part of the partition key.
```
pg_partman does have a mechanism to still apply primary/unique keys that are not part of the partition column. Just be aware that they are NOT enforced across the entire partition set; only for the individual partition. This is done with a template table. And to ensure the keys are applied when the initial child tables are created, that template table must be pre-created and its name supplied to the `create_parent()` call. We're going to use the original table as the basis and give a name similar to that so it makes sense after the name swapping later.

Another important note is that we changed the IDENTITY column from GENERATED ALWAYS to GENERATED BY DEFAULT. This is because we need to move existing values for that identity column into place. ALWAYS generally prevents manually entered values.
```sql
CREATE TABLE public.original_table_template (LIKE public.original_table);

ALTER TABLE public.original_table_template ADD PRIMARY KEY (col1);
```
If you do not pre-create a template table, pg_partman will always create one for you in the same schema that the extension was installed into. You can see its name by looking at the `template_table` column in the `part_config` table. However, if you add the index onto that template table after the `create_parent()` call, the already existing child tables will not have that index applied and you will have to go back and do that manually. However, any new child tables create after that will have the index.

The tricky part here is that we cannot yet have any child tables in the partition set that match data that currently exists in the original table. This is because we're going to be adding the old table as the DEFAULT table to our new partition table. If the DEFAULT table contains any data that matches a current child table's constraints, PostgreSQL will not allow that table to be added. So, with the below `create_parent()` call, we're going to start the partition set well ahead of the data we inserted and disable the automatic creation of a default table. In your case you will have to look at your current data set and pick a value well ahead of the current working set of data that may get inserted before you are able to run the table name swap process below. We're also setting the premake value to a low value to avoid having to rename too many child tables later. We'll increase premake back up to the default later (or you can set it to whatever you require).
```sql
SELECT min(col3), max(col3) FROM original_table;

              min              |              max  
-------------------------------+-------------------------------
 2023-03-21 11:09:31.980586-07 | 2023-03-28 11:09:31.980586-07
```
```sql
SELECT partman.create_parent(
    p_parent_table := 'public.new_partitioned_table'
    , p_control := 'col3'
    , p_interval := '1 day'
    , p_template_table:= 'public.original_table_template'
    , p_premake := 1
    , p_start_partition := (CURRENT_TIMESTAMP+'2 days'::interval)::text
    , p_default_table := false
);
```
The state of the new partitioned table should now look something like this. The current date for when this HowTo was written is given for reference:
```sql
SELECT CURRENT_TIMESTAMP;
       current_timestamp  
-------------------------------
 2023-03-28 11:23:55.971402-07

\d+ new_partitioned_table;
                                                 Partitioned table "public.new_partitioned_table"
 Column |           Type           | Collation | Nullable |             Default              | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+----------------------------------+----------+-------------+--------------+-------------
 col1   | bigint                   |           | not null | generated by default as identity | plain    |             |              |
 col2   | text                     |           | not null |                                  | extended |             |              |
 col3   | timestamp with time zone |           | not null | now()                            | plain    |             |              |
 col4   | text                     |           |          |                                  | extended |             |              |
Partition key: RANGE (col3)
Indexes:
    "new_partitioned_table_col3_idx" btree (col3)
Partitions: new_partitioned_table_p20230330 FOR VALUES FROM ('2023-03-30 00:00:00-07') TO ('2023-03-31 00:00:00-07')

```
You will need to update the `part_config` table to have the original table name. You can also update the template table if you didn't manually create one yourself, just be sure to both rename the table and update the `part_config` table as well. We'll reset the premake to the default value here as well.
```sql
UPDATE partman.part_config SET parent_table = 'public.original_table', premake = 4 WHERE parent_table = 'public.new_partitioned_table';
UPDATE 1
```
The next step, which is actually multiple steps in a single transaction, is the only outage of any significance that needs to be anticipated.

1. BEGIN transaction
1. Take an exclusive lock on the original table and the new table to ensure no gaps exist for data to be misrouted
1. If using an IDENTITY column, get the original last value
1. Rename the original table to the DEFAULT table name for the partition set
1. If using an IDENTITY column, DROP the IDENTITY from the old table
1. Rename the new table to the original table's name and rename child tables & sequence to match.
1. If using an IDENTITY column, reset the new table's identity to the latest value so any new inserts pick up where old table's sequence left off.
1. Add original table as the DEFAULT for the partition set
1. COMMIT transaction

If you are using an IDENTITY column, it is important to get its last value while the original table is locked and BEFORE you drop the old identity. Then use that returned value in the statement to RESET the IDENTITY column in the new table. You may need to increment the value returned a bit to stay ahead of current table usage, so this can be a little tricky with a very busy table, especially if your sequence values must remain unbroken. A query to obtain this is provided in the SQL statements below. If you are not using an IDENTITY, you can simply ignore those steps.

If at any point there is a problem with one of these mini-steps, just perform a ROLLBACK and you should return to the previous state and allow your original table to work as it was before.

```sql
BEGIN;

LOCK TABLE public.original_table IN ACCESS EXCLUSIVE MODE;
LOCK TABLE public.new_partitioned_table IN ACCESS EXCLUSIVE MODE;

SELECT max(col1)+1 FROM public.original_table;

ALTER TABLE public.original_table RENAME TO original_table_default;

-- IF using an IDENTITY column
ALTER TABLE public.original_table_default ALTER col1 DROP IDENTITY;

ALTER TABLE public.new_partitioned_table RENAME TO original_table;
ALTER TABLE public.new_partitioned_table_p20230330 RENAME TO original_table_p20230330;

-- IF using an IDENTITY column
ALTER SEQUENCE public.new_partitioned_table_col1_seq RENAME TO original_table_col1_seq;

-- IF using an IDENTITY column
ALTER TABLE public.original_table ALTER col1 RESTART WITH <<<VALUE OBTAINED ABOVE>>>;

ALTER TABLE public.original_table ATTACH PARTITION public.original_table_default DEFAULT;
```
```sql
COMMIT; or ROLLBACK;
```

Once COMMIT is run, the new partitioned table should now take over from the original non-partitioned table. And as long as all the properties have been applied to the new table, it should be working without any issues. Any new data coming in should either be going to the relevant child table, or if it doesn't happen to exist yet, it should go to the DEFAULT. The latter is not an issue since...

The next step is to partition the data out of the default. You DO NOT want to leave data in the default partition set for any length of time and especially leave any significant amount of data. If you look at the constraint that exists on a partitioned default, it is basically the anti-constraint of all other child tables. And when a new child table is added, PostgreSQL manages updating that default constraint as needed. But it must check if any data that should belong in that new child table already exists in the default. If it finds any, it will fail. But more importantly, it has to check EVERY entry in the default which can take quite a long time even with an index if there are billions of rows. During this check, there is an exclusive lock on the entire partition set.

The `partition_data_proc()` can handle moving the data out of the default. However, it cannot move data in any interval smaller than the partition interval when moving data out of the DEFAULT. This is related to what was just mentioned: You cannot add a child table to a partition set if that new child table's constraint covers data that already exists in the default.

pg_partman handles this by first moving all the data for a given child table out to a temporary table, then creating the child table, and then moving the data from the temp table into the new child table. Since we're moving data out of the DEFAULT and we cannot use a smaller interval, the only parameter that we need to pass is a batch size. The default batch size of 1 would only make a single child table then stop. If you want to move all the data in a single call, just pass a value large enough to cover the expected number of child tables. However, with a live table and LOTS rows, this could potentially generate A LOT of WAL files, especially since this method doubles the number of writes vs the offline method (default -> temp -> child table). So if keeping control of your disk usage is a concern, just give a smaller batch value and then give PostgreSQL some time to run through a few CHECKPOINTs and clean up its own WAL before moving on to the next batch.
```sql
CALL partman.partition_data_proc('public.original_table', p_loop_count := 200);
NOTICE:  Loop: 1, Rows moved: 134
NOTICE:  Loop: 2, Rows moved: 288
NOTICE:  Loop: 3, Rows moved: 288
NOTICE:  Loop: 4, Rows moved: 288
NOTICE:  Loop: 5, Rows moved: 288
NOTICE:  Loop: 6, Rows moved: 288
NOTICE:  Loop: 7, Rows moved: 288
NOTICE:  Loop: 8, Rows moved: 155
NOTICE:  Total rows moved: 2017
NOTICE:  Ensure to VACUUM ANALYZE the parent (and source table if used) after partitioning data

VACUUM ANALYZE original_table;
VACUUM
```
If you were using an IDENTITY column with GENERATED ALWAYS before, you'll want to change the identity on the partitioned table back to that from the current setting of BY DEFAULT
```sql
ALTER TABLE public.original_table ALTER col1 SET GENERATED ALWAYS;
```
Now, double-check that the child table creation was performed as expected. There is one missing here if you look closely but we'll discuss that below.
```sql
\d+ original_table
                                                   Partitioned table "public.original_table"
 Column |           Type           | Collation | Nullable |           Default            | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+------------------------------+----------+-------------+--------------+-------------
 col1   | bigint                   |           | not null | generated always as identity | plain    |             |              |
 col2   | text                     |           | not null |                              | extended |             |              |
 col3   | timestamp with time zone |           | not null | now()                        | plain    |             |              |
 col4   | text                     |           |          |                              | extended |             |              |
Partition key: RANGE (col3)
Indexes:
    "new_partitioned_table_col3_idx" btree (col3)
Partitions: original_table_p20230321 FOR VALUES FROM ('2023-03-21 00:00:00-07') TO ('2023-03-22 00:00:00-07'),
            original_table_p20230322 FOR VALUES FROM ('2023-03-22 00:00:00-07') TO ('2023-03-23 00:00:00-07'),
            original_table_p20230323 FOR VALUES FROM ('2023-03-23 00:00:00-07') TO ('2023-03-24 00:00:00-07'),
            original_table_p20230324 FOR VALUES FROM ('2023-03-24 00:00:00-07') TO ('2023-03-25 00:00:00-07'),
            original_table_p20230325 FOR VALUES FROM ('2023-03-25 00:00:00-07') TO ('2023-03-26 00:00:00-07'),
            original_table_p20230326 FOR VALUES FROM ('2023-03-26 00:00:00-07') TO ('2023-03-27 00:00:00-07'),
            original_table_p20230327 FOR VALUES FROM ('2023-03-27 00:00:00-07') TO ('2023-03-28 00:00:00-07'),
            original_table_p20230328 FOR VALUES FROM ('2023-03-28 00:00:00-07') TO ('2023-03-29 00:00:00-07'),
            original_table_p20230330 FOR VALUES FROM ('2023-03-30 00:00:00-07') TO ('2023-03-31 00:00:00-07'),
            original_table_default DEFAULT
```
And now to ensure any new data coming in is going to proper child tables and not the default, run maintenance on the new partitioned table to ensure the current premake partitions are created
```sql
SELECT partman.run_maintenance('public.original_table');

\d+ original_table
                                                   Partitioned table "public.original_table"
 Column |           Type           | Collation | Nullable |           Default            | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+------------------------------+----------+-------------+--------------+-------------
 col1   | bigint                   |           | not null | generated always as identity | plain    |             |              |
 col2   | text                     |           | not null |                              | extended |             |              |
 col3   | timestamp with time zone |           | not null | now()                        | plain    |             |              |
 col4   | text                     |           |          |                              | extended |             |              |
Partition key: RANGE (col3)
Indexes:
    "new_partitioned_table_col3_idx" btree (col3)
Partitions: original_table_p20230321 FOR VALUES FROM ('2023-03-21 00:00:00-07') TO ('2023-03-22 00:00:00-07'),
            original_table_p20230322 FOR VALUES FROM ('2023-03-22 00:00:00-07') TO ('2023-03-23 00:00:00-07'),
            original_table_p20230323 FOR VALUES FROM ('2023-03-23 00:00:00-07') TO ('2023-03-24 00:00:00-07'),
            original_table_p20230324 FOR VALUES FROM ('2023-03-24 00:00:00-07') TO ('2023-03-25 00:00:00-07'),
            original_table_p20230325 FOR VALUES FROM ('2023-03-25 00:00:00-07') TO ('2023-03-26 00:00:00-07'),
            original_table_p20230326 FOR VALUES FROM ('2023-03-26 00:00:00-07') TO ('2023-03-27 00:00:00-07'),
            original_table_p20230327 FOR VALUES FROM ('2023-03-27 00:00:00-07') TO ('2023-03-28 00:00:00-07'),
            original_table_p20230328 FOR VALUES FROM ('2023-03-28 00:00:00-07') TO ('2023-03-29 00:00:00-07'),
            original_table_p20230330 FOR VALUES FROM ('2023-03-30 00:00:00-07') TO ('2023-03-31 00:00:00-07'),
            original_table_p20230331 FOR VALUES FROM ('2023-03-31 00:00:00-07') TO ('2023-04-01 00:00:00-07'),
            original_table_p20230401 FOR VALUES FROM ('2023-04-01 00:00:00-07') TO ('2023-04-02 00:00:00-07'),
            original_table_default DEFAULT

```

Before this, depending on the child tables that were generated and the new data coming in, there may have been some data that still went to the default. You can check for that with a function that comes with pg_partman:
```sql
SELECT * FROM partman.check_default(p_exact_count := true);
```
If you don't pass "true" to the function, it just returns a 1 or 0 to indicate if any data exists in any default. This is convenient for monitoring situations and it can also be quicker since it stops checking as soon as it finds data in any child table. However, in this case we want to see exactly what our situation is, so passing true will give us an exact count of how many rows are left in the default.

You'll also notice that there is a child table missing in the set above (March 29, 2023). This is because we set the partition table to start 2 days ahead and we didn't have any data for that date in the original table. You can fix this one of two ways:

1. Wait for data for that time period to be inserted and once you're sure that interval is done, partition the data out of the DEFAULT the same way we did before.
1. Run the `partition_gap_fill()` function to fill any gaps immediately:
```sql
SELECT * FROM partman.partition_gap_fill('public.original_table');
 partition_gap_fill
--------------------
                  1
(1 row)

keith=# \d+ original_table
                                                   Partitioned table "public.original_table"
 Column |           Type           | Collation | Nullable |           Default            | Storage  | Compression | Stats target | Description
--------+--------------------------+-----------+----------+------------------------------+----------+-------------+--------------+-------------
 col1   | bigint                   |           | not null | generated always as identity | plain    |             |              |
 col2   | text                     |           | not null |                              | extended |             |              |
 col3   | timestamp with time zone |           | not null | now()                        | plain    |             |              |
 col4   | text                     |           |          |                              | extended |             |              |
Partition key: RANGE (col3)
Indexes:
    "new_partitioned_table_col3_idx" btree (col3)
Partitions: original_table_p20230321 FOR VALUES FROM ('2023-03-21 00:00:00-07') TO ('2023-03-22 00:00:00-07'),
            original_table_p20230322 FOR VALUES FROM ('2023-03-22 00:00:00-07') TO ('2023-03-23 00:00:00-07'),
            original_table_p20230323 FOR VALUES FROM ('2023-03-23 00:00:00-07') TO ('2023-03-24 00:00:00-07'),
            original_table_p20230324 FOR VALUES FROM ('2023-03-24 00:00:00-07') TO ('2023-03-25 00:00:00-07'),
            original_table_p20230325 FOR VALUES FROM ('2023-03-25 00:00:00-07') TO ('2023-03-26 00:00:00-07'),
            original_table_p20230326 FOR VALUES FROM ('2023-03-26 00:00:00-07') TO ('2023-03-27 00:00:00-07'),
            original_table_p20230327 FOR VALUES FROM ('2023-03-27 00:00:00-07') TO ('2023-03-28 00:00:00-07'),
            original_table_p20230328 FOR VALUES FROM ('2023-03-28 00:00:00-07') TO ('2023-03-29 00:00:00-07'),
            original_table_p20230329 FOR VALUES FROM ('2023-03-29 00:00:00-07') TO ('2023-03-30 00:00:00-07'),
            original_table_p20230330 FOR VALUES FROM ('2023-03-30 00:00:00-07') TO ('2023-03-31 00:00:00-07'),
            original_table_p20230331 FOR VALUES FROM ('2023-03-31 00:00:00-07') TO ('2023-04-01 00:00:00-07'),
            original_table_p20230401 FOR VALUES FROM ('2023-04-01 00:00:00-07') TO ('2023-04-02 00:00:00-07'),
            original_table_default DEFAULT
```
You can see that created the missing table for March 29.

At this point your new partitioned table should already have been in use and working without any issues!
```sql
INSERT INTO original_table (col2, col3, col4) VALUES ('newstuff', now(), 'newstuff');
INSERT INTO original_table (col2, col3, col4) VALUES ('newstuff', now(), 'newstuff');
SELECT * FROM original_table ORDER BY col1 DESC limit 5;
```


### Undoing Native Partitioning

Just as a normal table cannot be converted to a natively partitioned table, the opposite is also true. To undo native partitioning, you must move the data to a brand new table. There may be a way to do this online, but I do not currently have such a method planned out. If someone would like to submit a method or request that I look into it further, please feel free to make an issue on Github. The below method shows how to undo the daily partitioned example above, including handling an IDENTITY column if necessary.

First, we create a new table to migrate the data to. We can set a primary key, or any unique indexes that were made on the template. If there are any identity columns, they have to set the method to `GENERATED BY DEFAULT` since we will be adding values in manually as part of the migration. If it needs to be `ALWAYS`, this can be changed later.

If this table is going to continue to be used the same as the previous partitioned table, ensure all privileges, constraints & indexes are created on this table as well. Index & constraint creation can be delayed until after the data has been moved to speed up the migration.
```sql
CREATE TABLE public.new_regular_table (
    col1 bigint not null GENERATED BY DEFAULT AS IDENTITY PRIMARY KEY
    , col2 text not null
    , col3 timestamptz DEFAULT now() not null
    , col4 text);

CREATE INDEX ON public.new_regular_table (col3);
```

Now we can use the `undo_partition_proc()` procedure to move the data out of our partitioned table to the regular table.  We can even chose a smaller interval size for this as well to reduce the transaction runtime for each batch. The batch size is a default of 1, which would only run the given interval one time. We want to undo the entire thing with one call, so pass a number at high enough to run through all batches. It will stop when all the data has been moved, even if you passed a higher batch number. We also don't need to keep the old child tables once they're empty, so that is set to false. See the documentation for more information on other options for the undo functions/procedure.
```sql
CALL partman.undo_partition_proc(
    p_parent_table := 'public.original_table'
    , p_target_table := 'public.new_regular_table'
    , p_interval := '1 hour'::text
    , p_loop_count := 500
    , p_keep_table := false);
NOTICE:  Moved 13 row(s) to the target table. Removed 1 partitions.
NOTICE:  Batch: 1, Partitions undone this batch: 1, Rows undone this batch: 13
NOTICE:  Moved 13 row(s) to the target table. Removed 0 partitions.
NOTICE:  Batch: 2, Partitions undone this batch: 0, Rows undone this batch: 13
NOTICE:  Moved 13 row(s) to the target table. Removed 0 partitions.
NOTICE:  Batch: 3, Partitions undone this batch: 0, Rows undone this batch: 13
NOTICE:  Moved 13 row(s) to the target table. Removed 0 partitions.

[...]
NOTICE:  Batch: 160, Partitions undone this batch: 0, Rows undone this batch: 13
NOTICE:  Moved 12 row(s) to the target table. Removed 0 partitions.
NOTICE:  Batch: 161, Partitions undone this batch: 0, Rows undone this batch: 12
NOTICE:  Moved 2 row(s) to the target table. Removed 1 partitions.
NOTICE:  Batch: 162, Partitions undone this batch: 1, Rows undone this batch: 2
NOTICE:  Moved 0 row(s) to the target table. Removed 4 partitions.
NOTICE:  Total partitions undone: 13, Total rows moved: 2019
NOTICE:  Ensure to VACUUM ANALYZE the old parent & target table after undo has finished

VACUUM ANALYZE original_table;

VACUUM ANALYZE new_regular_table;
```
Now object names can be swapped around and the identity sequence reset and method changed if needed. Be sure to grab the original sequence value and use that when resetting.
```sql
SELECT max(col1)+1 FROM public.new_regular_table;

ALTER TABLE original_table RENAME TO old_partitioned_table;
ALTER SEQUENCE original_table_col1_seq RENAME TO old_partitioned_table_col1_seq;

ALTER TABLE new_regular_table RENAME TO original_table;
ALTER SEQUENCE new_regular_table_col1_seq RENAME TO original_table_col1_seq;
ALTER TABLE public.original_table ALTER col1 RESTART WITH <<<VALUE OBTAINED ABOVE>>>;
ALTER TABLE public.original_table ALTER col1 SET GENERATED ALWAYS;
```
```sql
INSERT INTO original_table (col2, col3, col4) VALUES ('newstuff', now(), 'newstuff');
INSERT INTO original_table (col2, col3, col4) VALUES ('newstuff', now(), 'newstuff');
SELECT * FROM original_table ORDER BY col1 DESC limit 5;
```